5″ (125mm) Stove Fitting Kit

Essential components for any stove installation into an existing chimney, this Fitting Kit for stoves with a 5″ (125mm) diameter outlet collar includes an 800mm x 400mm Register Plate (Chimney Closure Plate), 5″ Reducing Plate and a 1000mm length of leading brand Vitreous Enamelled Stove Pipe in 5″ internal diameter.

Sited above the stove, the metal Register Plate sits on – or can be screwed up to – the 4 supplied brackets and features a pre-cut central hole (reduced to 5″ diameter when used with the provided Reducing Plate) for the Stove Pipe to pass through, into the chimney cavity. This plate is easily cut to your required size and not only prevents debris or insulating granules from falling down the chimney, but also deflects heat rising from the stove into the room. The 1000mm length of leading brand Vitreous Enamelled Stove Pipe has a reduced male connection which must be fitted inside the outlet collar of the stove and sealed with our Vitcas or Kos Fire Cements, Envirograf Silicone Sealant or Heat Resistant Stove Rope. The traditional finish of our Stove Pipes not only perfectly match the body of the stove but can also withstand the heat from the burner without blemishing the finish of the flue.